- Title
- Solids friction factors for fluidized dense-phase conveying
- Creator
- Jones, M. G.; Williams, K. C.
- Relation
- Particulate Science and Technology Vol. 21, Issue 1, p. 45-56
- Publisher Link
- http://dx.doi.org/10.1080/02726350307495
- Publisher
- Francis & Taylor Inc
- Resource Type
- journal article
- Date
- 2003
- Description
- There have been numerous correlations proposed for determining a solids friction factor λs for fully suspended (dilute phase) pneumatic conveying. Currently, there are no equivalent correlations that predict λs in nonsuspension dense-phase flows. In dense-phase conveying there are two basic modes of flow: plug/slug flow, which is predominantly based on granular products, and fluidized dense-phase flow, which is more suited to fine powders exhibiting good air retention capabilities. In plug/slug type flow, the stresses between the moving plug of material and the pipe wall dominate the solid-phase frictional losses. In fluidized dense-phase flow the frictional losses are characterized as a mixture of particle-wall and particle-particle losses but are heavily influenced by the gas-solid interactions. In this paper, a series of calculations were performed on experimental data in order to estimate λs for four types of material conveyed in the fluidized dense-phase flow regime. The solids frictional factors were found to be relatively independent of particle properties for varying air and solid mass flow rates and pressure drops. The resultant pressure drop from the empirical model showed good agreement with the experimental data.
- Subject
- pneumatic conveying; solids friction; friction factor; dense phase; fluidized dense phase; pressure drop
- Identifier
- http://hdl.handle.net/1959.13/27227
- Identifier
- uon:1482
- Identifier
- ISSN:0272-6351
- Language
- eng
- Reviewed
- Hits: 1331
- Visitors: 1903
- Downloads: 0
| Thumbnail | File | Description | Size | Format |
|---|